Product description
System properties: The thermal shocks experienced in high intensity hydrocarbon fuelled fires.
FIRE STOP SP 500 may be used anywhere above the splash zone on offshore installations, and even in the splash zone with suitable protection. It is easy to install and maintain in a wide range of climates.
Although the added applied weight to a structure is low, FIRE STOP SP 500 will accommodate structural flexing and also has excellent resistance to explosions.
System: FIRE STOP SP 500.
Application areas
Application: FIRE STOP SP 500 is usedfor application on offshore steel or concrete structures, storage vessels and supports. It’s also used on preassembled units prior to transportation to site as well as to structures fire proofed after site erection.
Technical data
Color: off-White
Number of coats: one or more as required
Minimum practical thickness 10 mm
Theoretical coverage: 76m2/tone at 24 mm thickness
Cure: By hydraulic set
Initial set: 6 to 8 hours at 20◦ C and 50% RH
Density: 800kg/m3 (nominal)
Compressive strength: 2000kN/m2 (typical)
Combustibility: Non-combustible to BS 476: Part4
Smoke generation: Generation
Application instructions
Object temperature: not below + 10 °C, to max. + 50° C
Surface pre-treatment: Remove loose dust. Suction is recommended. Remove any grease or oil with dry rags.
Preparation of coating material: thorough mechanical mixing.